Think You're Cut Out For Doing Wood Burners? Try This Quiz

· 6 min read
Think You're Cut Out For Doing Wood Burners? Try This Quiz

Types of Wood Burners Near Me

Wood burning stoves provide a cost-effective alternative to expensive fossil fuel and electricity heating. They also reduce the need for imported wood, a major source of carbon.

In areas where wood smoke is prevalent studies have revealed that it contributes to the ambient winter pollution. This is especially true in valleys that are vulnerable to temperature changes.

1. Pine

Pine wood is a typical choice for log burning however, it should be first seasoned prior to use indoors. Unseasoned pine wood is more likely to create creosote, which can cause chimney blockages. Unseasoned pine wood may also produce lots of smoke and carbon dioxide, which is harmful to both animals and humans.

Many people don't use pine wood for their firewood because of its high resin content. They also fear that creosote will build up. Creosote is a substance that resembles tar that coats the inside of your chimney flue. It stops smoke from being able to escape your home. If it builds up enough it can lead to a chimney fire which is very dangerous. Hardwoods such as maple, oak, hickory and ash do not generate much creosote when they burn and also burn hotter producing less smoke.

The reason that pine wood produces lots of creosote when it is burned is because it is not seasoned properly. All wood needs to be seasoned prior to burning it indoors. Seasoning the wood reduces the moisture content which makes it easier to ignite and burn. When pine wood has been seasoning it will burn more quickly with less sparks and spitting. It will also produce lots of heat. However, it can produce a lot of creosote as it burns. Most people prefer hardwoods such as oak or hickory over pine wood when burning it.

2. Cedar

It is a softwood and although it produces good heat, its output is not nearly as powerful as other hardwood firewoods. It is fast to burn and can cause creosote to build up in the chimney. Many people are hesitant to use cedar for their fireplaces due to this.

Those who aren't concerned with creosote and other issues can make use of cedar for outdoor wood-burning fireplaces. Cedar isn't a good choice for indoor fireplaces, though, because of the oils that it releases when it is burned. If you are looking to use cedar for indoor use, you can use it in conjunction with firewood that is denser like oak or hickory.

The price of a firewood cord could range between $150 and $500. The amount of wood you purchase will last 6 to 12 weeks if you burn it twice a day.

If you don't want to purchase a whole cord you can cut your own firewood and save money. Certain tree services offer this service, but when you have the tools to cut your own wood, you can save even more money.

old wood stove  or unseasoned wood usually costs less than seasoned wood. If you plan to purchase firewood, consider buying it in the spring if possible. This will give the wood a year to season, which helps it burn better and with less smoke. It also makes the process more efficient and reduces delivery fees. If you want to go a step further, consider hiring a professional to split and stack your firewood.

3. Birch

Birch wood stoves near me could be a great choice for those who are looking for a fireplace set that is stylish and green. These attractive logs, made of birchwood, have realistic embers that create the appearance of a genuine fireplace fire.

The attractive birch wood logs are also suitable for fire pits for outdoor use. They don't create a lot of smoke or sparks and they are extremely easy to light. They are a great option for those who have a small space in their patio or backyard.

The slim birch is a multi-purpose hardwood tree that has waterproof bark that is often used for paper making, canoe construction homeopathy, and many other uses. Its wood is highly prized by artists, musicians and craftsmen due to its distinctive grain and texture.

Silver birch is a wonderful wood for burning. However it doesn't have the same density as other woods like oak or Hornbeam. A cord of silver birch won't be as hot.  old wood burning stove  is a popular kind of wood that is harvested during thinning of the forest.

Birch wood has low resin content, so it doesn't ignite or spew. It can also be burned green. But, it must be well-seasoned. It is a great alternative to basswood which has lots of water and needs to be dried before burning.

4. Maple

Maple is a great choice for wood burners because it is quick to ignite and burns hot. It also is a good choice for seasoned wood. However, it won't last as long as other hardwoods such as oak and hickory.

This wood comes in hard and soft varieties and in a variety of shapes and sizes. It also has a live edge. It also has natural hue that blends in with both traditional and contemporary decor. The wood is available as a kit with all the necessary parts and accessories to get started. The kit includes a wand/pen as well as solid brass tips (round and flat) and a shader tip. Shader tips are used to create realism through shading. Many people utilize this method to create artworks for commissions of their pets or family members.

Generally speaking, hardwoods such as maple and hickory last longer than softwoods such as pine and fir. This is because they tend to have lower pitch than softwoods, which results in an extended burning fire with minimal creosote build-up in the chimney.

Maple is a popular firewood that can be found in all parts of the United States. It is a heavy hardwood that has a high btu for pound and is easy to split. It is a great alternative to ash firewood that has been affected by the emerald ash borer and could be in short supply. When properly seasoned, this wood has long burning, steady flames.

5. Cherry

Cherry firewood logs provide a consistent burning and are a dense wood, making it a great choice for people who want lasting ambiance from their fireplace. The wood also emits an appealing scent and doesn't emit a lot of smoke. It can spark more than other hardwoods but you can easily manage this using an electric fireplace screen.



Pine Pine is accessible and affordable, but it does not season as well as hard hardwoods and can be difficult to ignite. You can use it to ignite a fire or for igniting, but after the flames are established, you should switch over to hardwoods.

Alder Alder is easy to split and moderately priced. It has a slow burning with a high output of heat. However it can be a disappointment to use in a fire that is open because it can ignite sparks.

Ash Oak is widely considered to be the most desirable hardwood and produces the highest heat, however it is also costly. It is worth the cost, however, if you want the most sturdy and efficient wood for your fireplace.

If you are looking for a new fireplace or wood stove to improve your home, get in touch with us today. We can tell you about the different kinds of wood burners we provide and help you select the right one for your needs. Our NFI-Certified Master Hearth Professionals will answer all of your questions.

6. Oak

Many people opt to use oak logs for their fireplace or stove because they are a beautiful traditional, classic scent. It also burns longer than most other types of logs which means it will keep you warm for a longer time. It is a great option for anyone looking to spend long evenings sitting around the fire or in the garden in summer with friends and family talking and sipping wine.

Unlike coniferous trees and hardwoods, such as hickory or oak have greater density and greater efficiency in fuel. This means they burn more hot and last longer, allowing more coals to ignite the fire.

Beech

While beech logs are good quality, they can take some time to season and split. They are able to burn well, producing a lot of warmth and bright flames. It is recommended to mix them with other slow-burning logs like Ash or Oak.

Beech wood can be found for sale in local garden centres and supermarkets however, you should stay clear of buying pallets used to transport timber as they'll be full of screws and nails. They will likely need a treatment using chemicals such as methyl bromide before they can be safely burned. If you're looking for cheap wood for your log stove, ask local tree trimming crews storm cleanup teams or construction crews if they have any extra wood that they'd like to donate. Check that the wood you are using is safe and has been treated with non-toxic preservatives like mineral oil or linseed.